AnyChat6.5视频通话UDP切换TCP端口不起作用！

houjbf · 发表于 2017-12-18 16:16:42

本帖最后由 houjbf 于 2017-12-18 16:19 编辑

如题。升级到6.5版本后，升级说明中说是可以通过设置 “streamtransmode  = 1” 把视频通话UDP改成TCP，测试后，不起作用。走的还是UDP。

下面是我的配置数据
[base settings]
serverid                      = 1
tcplistenport                = 8906
udpserviceport                = 8907
sdkauthpass                   =
demomode                      = 1
showtrayicon                = 1

[p2p settings]
routingpolicy                = 2
routingttl                   = 3
routingmtn                   = 4

[video settings]
videowidth                   = 320
videoheight                   = 240
videofps                      = 15
videogopsize                = 30
videobitrate                = 90000
videocodec                   = 1
videoquality                = 3
videopreset                   = 3

[audio settings]
audiosamplespersec          = 16000
audiochannels                = 1
audiobitspersample          = 16
audiocodec                   = 11
audiobitrate                = 15850

[function settings]
closefrontlink                = 1
autoaddroom                   = 1
allowguestlogin             = 0
sdkfilterplus                = IPCFilterPlus.dll
maxusersperroom             = 100
videocallstartroomid          = 1
tempfilepath                =
netchecktime                = 5000
nettimeouttime                = 20000
videocalltimeouttime          = 60000
servercbpathtype             = 0
clientcbpathtype             = 0
uploadfilepathstyle          = 2
uploadrootdir                =
uploadrooturl                =
streamtransmode             = 1

[debug settings]
autouploadloginfo             = 0
savelogrootdir                =
outputthreadstatus          = 0
outputrecordtask             = 0
debuglevel                   = 4
debugflags                   = 0