有关207错误代码

Code · 发表于 2014-1-5 14:05:02

Code 发表于 2014-1-5 13:47
不做业务逻辑处理是正常的

还是报207了

Code · 发表于 2014-1-5 14:08:48

admin 发表于 2014-1-5 13:48
全部更新到V4.9是否正常?如果不正常，请上传核心服务器，业务服务器的log信息，谢谢!

[2014-01-05 14:02:12(305)] AnyChat Server SDK Init,V4.9, Build Time:Jan 1 2014 11:40:33
[2014-01-05 14:02:12(305)] Invoke BRAS_InitSDK(0x0)
[2014-01-05 14:02:12(836)] Success connected to anychatcoreserver...
[2014-01-05 14:02:13(368)] OnUserLogoutActionExCallBack(UserId:-2, dwErrorCode:212) Elapse:0ms
[2014-01-05 14:02:17(743)] VerifyUserCallBack(UserName:460012032782286,UserId:2) ErrorCode:0 Elapse:0ms
[2014-01-05 14:02:17(743)] OnUserLoginActionCallBack(UserId:2,UserName:460012032782286) Elapse:0ms
[2014-01-05 14:02:17(899)] Invoke BRAS_TransBufferEx(ID:2-Len:1305)
[2014-01-05 14:02:19(618)] OnUserLogoutActionExCallBack(UserId:2, dwErrorCode:0) Elapse:0ms
[2014-01-05 14:02:19(618)] Invoke BRAS_TransBuffer(ID:2, buf[0]=0x3c, buf[172]=0xa, Len:173)
[2014-01-05 14:02:23(461)] VerifyUserCallBack(UserName:460012032782286,UserId:3) ErrorCode:0 Elapse:0ms
[2014-01-05 14:02:23(477)] OnUserLoginActionCallBack(UserId:3,UserName:460012032782286) Elapse:0ms
[2014-01-05 14:02:23(493)] Invoke BRAS_TransBufferEx(ID:3-Len:1305)
[2014-01-05 14:02:24(821)] OnUserLogoutActionExCallBack(UserId:3, dwErrorCode:0) Elapse:0ms
[2014-01-05 14:02:24(821)] Invoke BRAS_TransBuffer(ID:3, buf[0]=0x3c, buf[172]=0xa, Len:173)
[2014-01-05 14:02:28(493)] VerifyUserCallBack(UserName:460012032782286,UserId:4) ErrorCode:0 Elapse:0ms
[2014-01-05 14:02:28(508)] OnUserLoginActionCallBack(UserId:4,UserName:460012032782286) Elapse:0ms
[2014-01-05 14:02:28(508)] Invoke BRAS_TransBufferEx(ID:4-Len:1305)
[2014-01-05 14:02:29(758)] OnUserLogoutActionExCallBack(UserId:4, dwErrorCode:0) Elapse:0ms
[2014-01-05 14:02:29(758)] Invoke BRAS_TransBuffer(ID:4, buf[0]=0x3c, buf[172]=0xa, Len:173)
[2014-01-05 14:02:31(008)] VerifyUserCallBack(UserName:460012032782286,UserId:5) ErrorCode:0 Elapse:0ms
[2014-01-05 14:02:31(008)] OnUserLoginActionCallBack(UserId:5,UserName:460012032782286) Elapse:0ms
[2014-01-05 14:02:31(024)] Invoke BRAS_TransBufferEx(ID:5-Len:1305)
[2014-01-05 14:02:32(774)] OnUserLogoutActionExCallBack(UserId:5, dwErrorCode:0) Elapse:0ms
[2014-01-05 14:02:32(774)] Invoke BRAS_TransBuffer(ID:5, buf[0]=0x3c, buf[172]=0xa, Len:173)
[2014-01-05 14:02:33(524)] VerifyUserCallBack(UserName:460012032782286,UserId:6) ErrorCode:0 Elapse:0ms
[2014-01-05 14:02:33(524)] OnUserLoginActionCallBack(UserId:6,UserName:460012032782286) Elapse:0ms
[2014-01-05 14:02:33(540)] Invoke BRAS_TransBufferEx(ID:6-Len:1305)
[2014-01-05 14:02:34(821)] OnUserLogoutActionExCallBack(UserId:6, dwErrorCode:0) Elapse:0ms
[2014-01-05 14:02:34(821)] Invoke BRAS_TransBuffer(ID:6, buf[0]=0x3c, buf[172]=0xa, Len:173)
[2014-01-05 14:02:36(040)] VerifyUserCallBack(UserName:460012032782286,UserId:7) ErrorCode:0 Elapse:0ms
[2014-01-05 14:02:36(040)] OnUserLoginActionCallBack(UserId:7,UserName:460012032782286) Elapse:0ms
[2014-01-05 14:02:36(055)] Invoke BRAS_TransBufferEx(ID:7-Len:1305)
[2014-01-05 14:02:37(227)] OnUserLogoutActionExCallBack(UserId:7, dwErrorCode:0) Elapse:0ms
[2014-01-05 14:02:37(227)] Invoke BRAS_TransBuffer(ID:7, buf[0]=0x3c, buf[172]=0xa, Len:173)
[2014-01-05 14:02:38(258)] VerifyUserCallBack(UserName:460012032782286,UserId:8) ErrorCode:0 Elapse:0ms
[2014-01-05 14:02:38(258)] OnUserLoginActionCallBack(UserId:8,UserName:460012032782286) Elapse:0ms
[2014-01-05 14:02:38(274)] Invoke BRAS_TransBufferEx(ID:8-Len:1305)
[2014-01-05 14:02:39(540)] OnUserLogoutActionExCallBack(UserId:8, dwErrorCode:0) Elapse:0ms
[2014-01-05 14:02:39(540)] Invoke BRAS_TransBuffer(ID:8, buf[0]=0x3c, buf[172]=0xa, Len:173)

这是核心的日志

Code · 发表于 2014-1-5 14:11:33

admin 发表于 2014-1-5 13:48
全部更新到V4.9是否正常?如果不正常，请上传核心服务器，业务服务器的log信息，谢谢!

[2014-01-05 14:01:27(852)] ---------------------Init Service--------------------------
[2014-01-05 14:01:27(868)] Current File Version[4, 9, 0, 0],Build time:2014-01-01 11:41:52
[2014-01-05 14:01:27(977)] Start Server At Demo Mode!
[2014-01-05 14:01:28(008)] Load brservernetlayer.dll success!(V4.9, Build time:Jan 1 2014 11:41:21)
[2014-01-05 14:01:28(008)] Start TCP Server Successed(port=8906)!
[2014-01-05 14:01:28(008)] Start UDP Server Successed(port=8907)!
[2014-01-05 14:01:28(040)] AnyChat IPC Filter Plus Init, Build Time:Jan 1 2014 11:41:32
[2014-01-05 14:01:28(040)] Load SDK Filter Plus:IPCFilterPlus.dll Success, ver:SDK Filter Plus (IPC), for Windows V4.9
[2014-01-05 14:01:37(258)] Successful communication with the RecordServer!(127.0.0.1:2470, id:-1)
[2014-01-05 14:02:13(352)] Successful communicate with the business server!

贴错了这个是核心服务的日志

admin · 发表于 2014-1-5 14:15:49

您好，您可以在业务服务器里面加一些自己的日志，排除一下问题!

从上面的log来看，SDK已经是最新的版本了，很可能是您的代码存在某些问题!

Code · 发表于 2014-1-5 14:17:15

admin 发表于 2014-1-5 13:48
全部更新到V4.9是否正常?如果不正常，请上传核心服务器，业务服务器的log信息，谢谢!

  //  用户身份验证回调函数定义  根据函数返回值决定是否验证身份成功，当返回0时，必须分配一个唯一的userid
      private static int OnVerifyUserCallBack_main(string userName, string password, ref int userID, ref int userLevel, IntPtr nickName, int len, int userValue)
      {
         try
         {
            userID = QCDocument.Instance.UserID;

            if (password.ToUpper() == "AMB")
            {
                  userLevel = ConstPM.UserLevel_Android;
            }
            else if (password.ToUpper() == "WEB")
            {
                  userLevel = ConstPM.UserLevel_Web;
            }
            else
            {
                  return ConstPM.GV_ERR_CERTIFY_FAIL;
            }

            byte[] toBytes = Encoding.Convert(Encoding.UTF8, Encoding.GetEncoding("gb2312"), Encoding.UTF8.GetBytes(userName));
            Marshal.Copy(toBytes, 0, nickName, toBytes.Length);

         }
         catch (Exception ex)
         {
            QCDocument.Instance.AddToWinQue(new TWinMsg("OnVerifyUserCallBack_main", "严重异常:" + ex.Message));
         }
         return 0;
      }

这是验证时的代码

Code · 发表于 2014-1-5 14:18:39

admin 发表于 2014-1-5 13:38
两点建议：
1，更新核心服务器，业务服务器到最新的V4.9版本，看问题是否能解决!
2，用我们标准的业务服 ...

private void OnUserLoginAction_CallBack_main(int userId, string userName, int level, string addr, int userValue)
      {
         try
         {
            QCDocument.Instance.AddToWinQue(new TWinMsg(Module_Name, "用户登录成功:OnUserLoginAction(" + "userId:" + userId.ToString() + ",userName:" + userName.ToString()
                  + ",level:" + level.ToString() + ",addr:" + addr + ",userValue:" + userValue.ToString() + ")"));

            //说明：此处的userName是身份验证过程赋予的值安卓为IMSI，WEB为SimNO,苹果未扩展

            string msg = string.Format("{0},{1}", userId, userName);
            switch (level)
            {
                  case ConstPM.UserLevel_Android:
                     {
                        ExeAndroidLogin exe = new ExeAndroidLogin();
                        //exe.Run(msg);
                        ThreadPool.QueueUserWorkItem(new WaitCallback(exe.Run), msg);
                        break;
                     }
                  case ConstPM.UserLevel_Web:
                     {
                        ExeWebLogin exe = new ExeWebLogin();
                        //exe.Run(msg);
                        ThreadPool.QueueUserWorkItem(new WaitCallback(exe.Run), msg);
                        break;
                     }
            }
         }
         catch(Exception ex)
         {
            QCDocument.Instance.AddToWinQue(new TWinMsg("OnUserLoginAction_CallBack_main", "严重异常:" + ex.Message));
         }
      }

这是登陆后推送消息的代码能解决吗比较急

admin · 发表于 2014-1-5 14:20:10

您好，在您的代码中，UserID怎么是一个固定值，没有和用户名，密码关联?

Code · 发表于 2014-1-5 14:21:53

admin 发表于 2014-1-5 14:15
您好，您可以在业务服务器里面加一些自己的日志，排除一下问题!

从上面的log来看，SDK已经是最新的版本 ...

我已经都捕获异常了就算是出错应该不上报到你们的回调函数

Code · 发表于 2014-1-5 14:22:47

admin 发表于 2014-1-5 14:20
您好，在您的代码中，UserID怎么是一个固定值，没有和用户名，密码关联?

以1开始递增和用户名关联

Code · 发表于 2014-1-5 14:24:08

admin 发表于 2014-1-5 14:20
您好，在您的代码中，UserID怎么是一个固定值，没有和用户名，密码关联?

可以和您qq聊吗

		自动登录	找回密码
密码			立即注册