AnyChat技术支持论坛

标题: 组播问题 [打印本页]

作者: asdasd 时间: 2016-1-5 11:38
标题: 组播问题
我按照论坛中示例的提示，设置了组播策略，但是不能用问题可能出在哪呢

作者: 佰锐科技-李永星 时间: 2016-1-5 11:41
本帖最后由佰锐科技-李永星于 2016-1-5 11:43 编辑

您好，请参考此贴http://bbs.anychat.cn/forum.php? ... tid=1987&highlight=×鲥
AnyChat IP组播示例程序及文档

作者: asdasd 时间: 2016-1-5 11:59

佰锐科技-李永星发表于 2016-1-5 11:41
您好，请参考此贴http://bbs.anychat.cn/forum.php? ... tid=1987&highlight=×鲥
AnyChat IP组播示例程序 ...

您好我就是参考这个示例程序做的，结果实现不了组播，感觉很奇怪

作者: 佰锐科技-陈伟 时间: 2016-1-5 12:06

asdasd 发表于 2016-1-5 11:59
您好我就是参考这个示例程序做的，结果实现不了组播，感觉很奇怪

您好 IP组播技术需要三层交换机，或路由器支持请参考什么是IP组播技术，有什么作用？

作者: asdasd 时间: 2016-1-5 12:37
我用的是路由器，用您的示例测试的时候可以组播，用我自己的程序就不行

作者: 佰锐科技-邵光清 时间: 2016-1-5 12:52

asdasd 发表于 2016-1-5 12:37
我用的是路由器，用您的示例测试的时候可以组播，用我自己的程序就不行

您好，请将设置组播策略+加入组播的代码发上来分析，谢谢！

作者: asdasd 时间: 2016-1-5 13:07

佰锐科技-邵光清发表于 2016-1-5 12:52
您好，请将设置组播策略+加入组播的代码发上来分析，谢谢！

int multiCast = AnyChatCoreSDK.BRAC_MCPOLITIC_SERVERANDSERVERMC;
         int dwFlags = AnyChatCoreSDK.BRAC_MCFLAGS_JOINGROUP | AnyChatCoreSDK.BRAC_MCFLAGS_SENDDATA | AnyChatCoreSDK.BRAC_MCFLAGS_RECVDATA;
         AnyChatCoreSDK.SetSDKOption(AnyChatCoreSDK.BRAC_SO_NETWORK_MULTICASTPOLITIC, ref multiCast, sizeof(int));
         AnyChatCoreSDK.MultiCastControl("224.2.3.4", 8100, "", 5, dwFlags);

作者: asdasd 时间: 2016-1-5 13:07

asdasd 发表于 2016-1-5 13:07
int multiCast = AnyChatCoreSDK.BRAC_MCPOLITIC_SERVERANDSERVERMC;
int dwFlags = AnyCha ...

我用的是C#

作者: 佰锐科技-邵光清 时间: 2016-1-5 14:06
本帖最后由佰锐科技-邵光清于 2016-1-5 14:23 编辑

asdasd 发表于 2016-1-5 13:07
int multiCast = AnyChatCoreSDK.BRAC_MCPOLITIC_SERVERANDSERVERMC;
int dwFlags = AnyCha ...

您好，这两句改为这样，是否OK？

AnyChatCoreSDK.BRAC_SetSDKOption(AnyChatCoreSDK.BRAC_SO_NETWORK_MULTICASTPOLITIC, ref multiCast, sizeof(int));
AnyChatCoreSDK.BRAC_MultiCastControl("224.2.3.4", 8100, "", 5, dwFlags);

复制代码

作者: asdasd 时间: 2016-1-5 14:15
不行改成这样要报错必须得袋中AnyChatCoreSDK调用

作者: asdasd 时间: 2016-1-11 14:03

佰锐科技-邵光清发表于 2016-1-5 14:06
您好，这两句改为这样，是否OK？

我在测试的时候一台电脑用的是网站上的示例，一台电脑用的是自己写的客户端，就可以实现组播
如果我两台PC都用自己写的客户端就不能实现组播

作者: admin 时间: 2016-1-11 14:11
您可以对比一下日志文件（您自己写的程序的日志文件，以及标准示例代码的日志文件）：BRAnyChatCore.log，位于可执行程序目录下（Web版本位于插件安装目录下），看看是否能发现一些差异？

作者: asdasd 时间: 2016-1-11 14:29
测试程序的日志
[2016-01-11 14:23:06(695)] ---------------------------AnyChat Platform Core SDK Client Log---------------------------
[2016-01-11 14:23:06(695)] Load BRAnyChatCore.dll success!(V5.3 Build Time:Aug 10 2015 12:20:22)
[2016-01-11 14:23:07(028)] Load BRMiscUtil.dll success!(V5.3 Build Time:Aug 10 2015 12:20:50)
[2016-01-11 14:23:07(127)] Load BRMediaUtil.dll success!(V5.3 Build Time:Aug 10 2015 12:20:02)
[2016-01-11 14:23:07(161)] Load BRMediaShow.dll success!(V5.3 Build Time:Aug 10 2015 12:20:53)
[2016-01-11 14:23:07(202)] Load BRMediaCore.dll success!(V5.3 Build Time:Aug 10 2015 12:21:04)
[2016-01-11 14:23:08(806)] Support video show pixfmt:YUV420P
[2016-01-11 14:23:21(234)] Invoke Connect(192.168.1.104,8906)=0
[2016-01-11 14:23:21(237)] Invoke LoginServer(username=123)
[2016-01-11 14:23:21(241)] CheckClientSocketLink Connect(ip=192.168.1.104,port=8906)
[2016-01-11 14:23:21(406)] Server version: V5.2(Build Time:2015-01-19 11:33:43, Server OS:Windows)
[2016-01-11 14:23:21(419)] Message OnConnect(bSuccess:1, errorcode=0)
[2016-01-11 14:23:21(468)] Message OnLoginSystem(userid=-2,errorcode=0,username=123), msg deliver worked(1)
[2016-01-11 14:23:21(501)] Server running time: 0 days, 0 hours, 1 minutes, license mode:0
[2016-01-11 14:23:21(519)] Success add upnp map(port:50445, tcp)
[2016-01-11 14:23:21(553)] Success add upnp map(port:60336, udp)
[2016-01-11 14:23:21(569)] Connection to streaming media server successfully!(udp delay:31ms)
[2016-01-11 14:23:24(829)] Invoke EnterRoom(roomid=1)
[2016-01-11 14:23:24(873)] Message OnEnterRoom(roomid=1,errorcode=0,siteindex=0)
[2016-01-11 14:23:24(881)] Message OnReceiveOnlineUser(count=1,roomid=1)
[2016-01-11 14:23:24(903)] Invoke UserSpeakControl(userid=-2,bOpen=1)
[2016-01-11 14:23:25(111)] WaveIn Audio Capture Driver(麦克风 (High Definition Audio )
[2016-01-11 14:23:25(127)] Audio Init, error:0, device:0, 1, 16000, 16, capmode:0
[2016-01-11 14:23:25(128)] Invoke UserCameraControl(userid=-2, bOpen=1, stream=0)
[2016-01-11 14:23:25(144)] Audio codec init, handle:1, 11, 1, 16000, 16, 15850
[2016-01-11 14:23:25(150)] Audio FX Status: VAD:1, NS:1, AGC:1, AEC:1
[2016-01-11 14:23:25(160)] Invoke SetVideoPos(dwUserId:-2, hWnd:0x10572, l:27, t:26, r:165, b:130)
[2016-01-11 14:23:25(369)] Audio Playback Device Init(0, 1, 16000, 16), WaveOut Playback Driver
[2016-01-11 14:23:26(237)] MinCroppingSize(640, 480) MaxCroppingSize(640, 480) Format(YUY2, 0x32595559)
[2016-01-11 14:23:26(261)] MinCroppingSize(640, 480) MaxCroppingSize(640, 480) Format(YUY2, 0x8d2681)
[2016-01-11 14:23:26(264)] MinCroppingSize(320, 240) MaxCroppingSize(320, 240) Format(YUY2, 0x32595559)
[2016-01-11 14:23:26(266)] MinCroppingSize(320, 240) MaxCroppingSize(320, 240) Format(YUY2, 0x8d2681)
[2016-01-11 14:23:26(269)] MinCroppingSize(160, 120) MaxCroppingSize(160, 120) Format(YUY2, 0x32595559)
[2016-01-11 14:23:26(271)] MinCroppingSize(160, 120) MaxCroppingSize(160, 120) Format(YUY2, 0x8d2681)
[2016-01-11 14:23:26(274)] Video Config Size(320, 240) Format(YUY2, 25fps)
[2016-01-11 14:23:26(393)] video init finish:320x240, YUY2, fps:30, codecid:1
[2016-01-11 14:23:27(372)] video codec init:codec:1, 15fps, 320x240, bitrate:90kbps, quality:3, preset:3, gop:30, handle:2
[2016-01-11 14:23:52(294)] Message OnUserEnterRoom(userid=-3,nickname=guest001,siteindex=1)
[2016-01-11 14:23:52(297)] Invoke UserSpeakControl(userid=-3,bOpen=1)
[2016-01-11 14:23:52(299)] Invoke UserCameraControl(userid=-3, bOpen=1, stream=0)
[2016-01-11 14:23:52(301)] Invoke SetVideoPos(dwUserId:-3, hWnd:0x10586, l:105, t:26, r:487, b:312)
[2016-01-11 14:23:52(810)] userid(-3) audio decode, codec:11, 1 channel, 16000Hz
[2016-01-11 14:23:52(993)] On Remote UserCameraControl(dwUserId:-3, bOpen:1)
[2016-01-11 14:23:52(995)] On Remote UserSpeakControl(dwUserId:-3, bOpen:1)
[2016-01-11 14:23:53(037)] Message OnP2PConnectState(userid=-3, state=1)
[2016-01-11 14:23:53(269)] Message OnP2PConnectState(userid=-3, state=3)
[2016-01-11 14:23:55(065)] userid(-3) video decode, codec:1, 320x240, delay:16ms
[2016-01-11 14:24:10(601)] Invoke AudioGetVolume(device:1, dwVolume:50)=0
[2016-01-11 14:24:10(603)] Invoke AudioGetVolume(device:0, dwVolume:50)=0
[2016-01-11 14:25:42(583)] Message OnP2PConnectState(userid=-3, state=2)
[2016-01-11 14:25:42(585)] Message OnP2PConnectState(userid=-3, state=0)
[2016-01-11 14:25:42(588)] Invoke SetSDKOption(BRAC_SO_NETWORK_P2PPOLITIC=0)
[2016-01-11 14:27:25(200)] Invoke UserSpeakControl(userid=-2,bOpen=0)
[2016-01-11 14:27:25(216)] Invoke UserCameraControl(userid=-2, bOpen=0, stream=0)
[2016-01-11 14:27:25(377)] Invoke UserSpeakControl(userid=-3,bOpen=0)
[2016-01-11 14:27:25(380)] Invoke UserCameraControl(userid=-3, bOpen=0, stream=0)
[2016-01-11 14:27:25(501)] Invoke LeaveRoom(roomid=-1) Elapse:109 ms
[2016-01-11 14:27:30(921)] Invoke LogoutServer(userid=-2) Elapse:31 ms
[2016-01-11 14:27:30(980)] Invoke BRAC_Release Elapse:125 ms

作者: asdasd 时间: 2016-1-11 14:29
我的程序的日志
[2016-01-11 14:20:12(898)] ---------------------------AnyChat Platform Core SDK Client Log---------------------------
[2016-01-11 14:20:12(899)] Load BRAnyChatCore.dll success!(V5.3 Build Time:Aug 10 2015 12:20:22)
[2016-01-11 14:20:13(075)] Load BRMiscUtil.dll success!(V5.3 Build Time:Aug 10 2015 12:20:50)
[2016-01-11 14:20:14(355)] Load BRMediaUtil.dll success!(V5.3 Build Time:Aug 10 2015 12:20:02)
[2016-01-11 14:20:14(381)] Load BRMediaShow.dll success!(V5.3 Build Time:Aug 10 2015 12:20:53)
[2016-01-11 14:20:14(412)] Load BRMediaCore.dll success!(V5.3 Build Time:Aug 10 2015 12:21:04)
[2016-01-11 14:20:14(594)] Invoke Connect(192.168.1.104,8906)=0
[2016-01-11 14:20:14(595)] Invoke LoginServer(username=guest001)
[2016-01-11 14:20:14(666)] Invoke UserCameraControl(userid=-1, bOpen=1, stream=0)
[2016-01-11 14:20:14(666)] Invoke UserSpeakControl(userid=-1,bOpen=1)
[2016-01-11 14:20:14(676)] CheckClientSocketLink Connect(ip=192.168.1.104,port=8906)
[2016-01-11 14:20:14(847)] Server version: V5.2(Build Time:2015-01-19 11:33:43, Server OS:Windows)
[2016-01-11 14:20:15(058)] Message OnConnect(bSuccess:1, errorcode=0)
[2016-01-11 14:20:15(339)] Message OnLoginSystem(userid=-3,errorcode=0,username=guest001), msg deliver worked(1)
[2016-01-11 14:20:15(341)] Server running time: 0 days, 0 hours, 1 minutes, license mode:0
[2016-01-11 14:20:15(371)] Success add upnp map(port:61921, tcp)
[2016-01-11 14:20:15(392)] Connection to streaming media server successfully!(udp delay:31ms)
[2016-01-11 14:20:15(395)] Success add upnp map(port:51814, udp)
[2016-01-11 14:20:15(929)] Invoke EnterRoom(roomid=1)
[2016-01-11 14:20:16(176)] Message OnEnterRoom(roomid=1,errorcode=0,siteindex=1)
[2016-01-11 14:20:16(220)] Message OnReceiveOnlineUser(count=2,roomid=1)
[2016-01-11 14:20:16(221)] On Remote UserSpeakControl(dwUserId:-2, bOpen:1)
[2016-01-11 14:20:16(222)] On Remote UserCameraControl(dwUserId:-2, bOpen:1)
[2016-01-11 14:20:16(223)] Invoke SetVideoPos(dwUserId:-1, hWnd:0x13053e, l:0, t:0, r:167, b:140)
[2016-01-11 14:20:16(224)] Invoke UserCameraControl(userid=-1, bOpen=1, stream=0)
[2016-01-11 14:20:16(225)] Invoke UserSpeakControl(userid=-1,bOpen=1)
[2016-01-11 14:20:16(318)] WaveIn Audio Capture Driver(Internal Microphone (Conexant S)
[2016-01-11 14:20:16(319)] Audio Init, error:0, device:0, 1, 16000, 16, capmode:0
[2016-01-11 14:20:16(335)] Audio FX Status: VAD:1, NS:1, AGC:1, AEC:1
[2016-01-11 14:20:16(401)] Audio codec init, handle:1, 11, 1, 16000, 16, 15850
[2016-01-11 14:20:16(452)] Invoke SetVideoPos(dwUserId:-2, hWnd:0xb00f2, l:0, t:0, r:480, b:384)
[2016-01-11 14:20:16(452)] Invoke UserCameraControl(userid=-2, bOpen=1, stream=0)
[2016-01-11 14:20:16(453)] Invoke UserSpeakControl(userid=-2,bOpen=1)
[2016-01-11 14:20:16(453)] Audio Playback Device Init(0, 1, 16000, 16), WaveOut Playback Driver
[2016-01-11 14:20:16(662)] Message OnP2PConnectState(userid=-2, state=1)
[2016-01-11 14:20:16(909)] userid(-2) video decode, codec:1, 320x240, delay:47ms
[2016-01-11 14:20:16(920)] Message OnP2PConnectState(userid=-2, state=3)
[2016-01-11 14:20:17(278)] MinCroppingSize(640, 480) MaxCroppingSize(640, 480) Format(YUY2, 0x32595559)
[2016-01-11 14:20:17(279)] MinCroppingSize(320, 240) MaxCroppingSize(320, 240) Format(YUY2, 0x32595559)
[2016-01-11 14:20:17(279)] MinCroppingSize(160, 120) MaxCroppingSize(160, 120) Format(YUY2, 0x32595559)
[2016-01-11 14:20:17(281)] Video Config Size(320, 240) Format(YUY2, 25fps)
[2016-01-11 14:20:17(342)] video init finish:320x240, YUY2, fps:30, codecid:1
[2016-01-11 14:20:18(625)] video codec init:codec:1, 15fps, 320x240, bitrate:90kbps, quality:3, preset:3, gop:30, handle:4
[2016-01-11 14:20:20(558)] userid(-2) audio decode, codec:11, 1 channel, 16000Hz
[2016-01-11 14:22:06(282)] OnSocketClose, index(3)-errorcode(0-0), flags:0x481, bTcp(1),userid(-2), list:0

[2016-01-11 14:22:06(290)] Message OnP2PConnectState(userid=-2, state=2)
[2016-01-11 14:22:06(291)] Message OnP2PConnectState(userid=-2, state=0)
[2016-01-11 14:23:49(114)] On Remote UserSpeakControl(dwUserId:-2, bOpen:0)
[2016-01-11 14:23:49(115)] On Remote UserCameraControl(dwUserId:-2, bOpen:0)
[2016-01-11 14:23:49(116)] Message OnUserLeaveRoom(userid=-2,siteindex=0)
[2016-01-11 14:24:40(258)] Invoke LeaveRoom(roomid=1) Elapse:843 ms
[2016-01-11 14:24:40(296)] Invoke LogoutServer(userid=-3) Elapse:47 ms
[2016-01-11 14:24:40(337)] Invoke BRAC_Release Elapse:0 ms

作者: asdasd 时间: 2016-1-11 14:30

admin 发表于 2016-1-11 14:11
您可以对比一下日志文件（您自己写的程序的日志文件，以及标准示例代码的日志文件）：BRAnyChatCore.log， ...

我将两个日志都贴出来了我自己看了看没看出什么区别，
Message OnP2PConnectState(userid=-3, state=2) 这句话是什么意思

作者: 佰锐科技-陈伟 时间: 2016-1-11 15:02
本帖最后由佰锐科技-陈伟于 2016-1-11 15:03 编辑

asdasd 发表于 2016-1-11 14:30
我将两个日志都贴出来了我自己看了看没看出什么区别，
Message OnP2PConnectState(userid=- ...

您好 state=2 表示P2P连接成功 UDP连接

作者: asdasd 时间: 2016-1-11 15:15

佰锐科技-陈伟发表于 2016-1-11 15:02
您好 state=2 表示P2P连接成功 UDP连接

请问state=0，1，2，3分别都代表什么呢

作者: 佰锐科技-陈伟 时间: 2016-1-11 15:20

asdasd 发表于 2016-1-11 15:15
请问state=0，1，2，3分别都代表什么呢

您好请参考 AnyChat for Windows SDK 开发手册

QQ截图20160111151912.png (118.66 KB, 下载次数: 2478)

欢迎光临 AnyChat技术支持论坛 (http://bbs.anychat.cn/)