AnyChat技术支持论坛

标题: anychatweb 如何手动释放资源 [打印本页]

作者: easyAnyChat 时间: 2016-6-22 15:21
标题: anychatweb 如何手动释放资源
工程师大哥在anychat中如何手动释放资源我看日志中 [2016-06-22 15:09:59(651)] Invoke BRAC_Release Elapse:31 ms 这个关闭浏览器或者刷新浏览器时调用的可不可以手动调用我没在sdk里面找到这个方法

作者: easyAnyChat 时间: 2016-6-22 15:37
[2016-06-22 15:06:21(790)] Invoke LeaveRoom(roomid=-1) Elapse:0 ms 而且好像这个也不正常吧 0ms

作者: 佰锐科技-陈伟 时间: 2016-6-22 16:35

easyAnyChat 发表于 2016-6-22 15:37
[2016-06-22 15:06:21(790)] Invoke LeaveRoom(roomid=-1) Elapse:0 ms 而且好像这个也不正常吧 0ms

您好 Web SDK中可以调用退出房间后在调用BRAC_Logout 释放SDK内部所占用的系统资源。

作者: easyAnyChat 时间: 2016-6-22 16:47
我这边视频通话第一次能正确获取视频内容当我退出房间并调用BARC_Logout() 再次进入不能正确获取视频内容其他都正常日志也正常当刷新页面后视频内容又能正常获取

作者: 佰锐科技-陈伟 时间: 2016-6-22 16:56

easyAnyChat 发表于 2016-6-22 16:47
我这边视频通话第一次能正确获取视频内容当我退出房间并调用BARC_Logout() 再次进入不能正确获取视频内 ...

您好麻烦把双方日志文件贴上来我们分析看看

作者: easyAnyChat 时间: 2016-6-22 17:12
等下我先提供下客户端的日志[2016-06-22 17:00:38(512)] ---------------------------AnyChat Platform Core SDK Client Log---------------------------
[2016-06-22 17:00:38(512)] Load BRAnyChatCore.dll success!(V5.3 Build Time

ec 17 2015 13:53:38)
[2016-06-22 17:00:38(515)] Load BRMiscUtil.dll success!(V5.3 Build Time

ec 17 2015 13:54:56)
[2016-06-22 17:00:38(530)] Load BRMediaUtil.dll success!(V5.3 Build Time

ec 17 2015 13:53:00)
[2016-06-22 17:00:38(531)] Load BRMediaShow.dll success!(V5.3 Build Time

ec 17 2015 13:55:02)
[2016-06-22 17:00:38(532)] Load BRMediaCore.dll success!(V5.3 Build Time

ec 17 2015 13:55:11)
[2016-06-22 17:00:38(568)] Invoke Connect(****,8906)=0
[2016-06-22 17:00:38(570)] Invoke Login(username:cq_yubei)=0
[2016-06-22 17:00:38(570)] Invoke EnterRoom(roomid=1036)
[2016-06-22 17:00:38(638)] Create anychatdnsserver connect:***(8906)
[2016-06-22 17:00:39(179)] CheckClientSocketLink Connect(ip=***,port=8906)
[2016-06-22 17:00:39(409)] Server version: V6.0(Build Time:2016-03-19 21:35:57, Server OS:Windows)
[2016-06-22 17:00:39(671)] Message OnConnect(bSuccess:1, errorcode=0)
[2016-06-22 17:00:40(321)] Message OnLoginSystem(userid=-799,errorcode=0,username=cq_yubei), msg deliver worked(1)
[2016-06-22 17:00:40(321)] Server running time: 6 days, 7 hours, 6 minutes, license mode:1
[2016-06-22 17:00:40(413)] Connection to streaming media server successfully!(udp delay:47ms)
[2016-06-22 17:00:40(712)] Message OnEnterRoom(roomid=1036,errorcode=0,siteindex=0)
[2016-06-22 17:00:40(712)] Message OnReceiveOnlineUser(count=1,roomid=1036)
[2016-06-22 17:00:40(712)] Audio Capture(Driver:3, ) Init Failed:10500, (6.1.7601[1537])
[2016-06-22 17:00:40(712)] Audio Init, error:10500, device:0, 0, 0, 0, capmode:0
[2016-06-22 17:00:40(712)] Audio Playback Device Init(10500, 2, 44100, 16), WaveOut Playback Driver
[2016-06-22 17:00:40(720)] Invoke UserCameraControl(userid=-799, bOpen=1, stream=0)
[2016-06-22 17:00:40(725)] Invoke UserSpeakControl(userid=-799,bOpen=1)
[2016-06-22 17:00:40(741)] ****Open Local Video Fail,ErrorCode:10011
[2016-06-22 17:01:30(879)] Message OnUserEnterRoom(userid=-800,nickname=1,siteindex=1)
[2016-06-22 17:01:30(883)] Invoke UserCameraControl(userid=-800, bOpen=1, stream=0)
[2016-06-22 17:01:30(883)] Invoke UserSpeakControl(userid=-800,bOpen=1)
[2016-06-22 17:01:33(155)] userid(-800) video decode, codec:1, 320x240, delay:16ms
[2016-06-22 17:01:34(460)] userid(-800) audio decode, codec:11, 1 channel, 16000Hz
[2016-06-22 17:01:34(566)] On Remote UserCameraControl(dwUserId:-800, bOpen:1)
[2016-06-22 17:01:34(696)] On Remote UserSpeakControl(dwUserId:-800, bOpen:1)
[2016-06-22 17:01:45(724)] Invoke LeaveRoom(roomid=-1) Elapse:0 ms
[2016-06-22 17:01:45(865)] Invoke LogoutServer(userid=-799) Elapse:140 ms
[2016-06-22 17:01:51(786)] Invoke Connect(***,8906)=0
[2016-06-22 17:01:51(787)] Invoke Login(username:cq_yubei)=0
[2016-06-22 17:01:51(787)] Invoke EnterRoom(roomid=1036)
[2016-06-22 17:01:51(806)] Create anychatdnsserver connect:***.112(8906)
[2016-06-22 17:01:55(405)] CheckClientSocketLink Connect(ip=***,port=8906)
[2016-06-22 17:01:55(636)] Server version: V6.0(Build Time:2016-03-19 21:35:57, Server OS:Windows)
[2016-06-22 17:01:55(896)] Message OnConnect(bSuccess:1, errorcode=0)
[2016-06-22 17:01:56(486)] Message OnLoginSystem(userid=-801,errorcode=0,username=cq_yubei), msg deliver worked(1)
[2016-06-22 17:01:56(488)] Load BRMediaUtil.dll success!(V5.3 Build Time

ec 17 2015 13:53:00)
[2016-06-22 17:01:56(489)] Load BRMediaShow.dll success!(V5.3 Build Time

ec 17 2015 13:55:02)
[2016-06-22 17:01:56(489)] Load BRMediaCore.dll success!(V5.3 Build Time

ec 17 2015 13:55:11)
[2016-06-22 17:01:56(496)] Server running time: 6 days, 7 hours, 7 minutes, license mode:1
[2016-06-22 17:01:56(596)] Connection to streaming media server successfully!(udp delay:47ms)
[2016-06-22 17:01:56(906)] Message OnEnterRoom(roomid=1036,errorcode=0,siteindex=0)
[2016-06-22 17:01:56(906)] Message OnReceiveOnlineUser(count=2,roomid=1036)
[2016-06-22 17:01:56(907)] Audio Capture(Driver:3, ) Init Failed:10500, (6.1.7601[1537])
[2016-06-22 17:01:56(907)] Audio Init, error:10500, device:0, 0, 0, 0, capmode:0
[2016-06-22 17:01:56(907)] Audio Playback Device Init(10500, 2, 44100, 16), WaveOut Playback Driver
[2016-06-22 17:01:56(911)] Invoke UserCameraControl(userid=-801, bOpen=1, stream=0)
[2016-06-22 17:01:56(914)] Invoke UserSpeakControl(userid=-801,bOpen=1)
[2016-06-22 17:01:56(916)] ****Open Local Video Fail,ErrorCode:10011
[2016-06-22 17:01:57(408)] Invoke UserCameraControl(userid=-800, bOpen=1, stream=0)
[2016-06-22 17:01:57(408)] Invoke UserSpeakControl(userid=-800,bOpen=1)
[2016-06-22 17:01:57(847)] userid(-800) audio decode, codec:11, 1 channel, 16000Hz
[2016-06-22 17:01:59(377)] userid(-800) video decode, codec:1, 320x240, delay:0ms
[2016-06-22 17:02:17(860)] Message OnUserLeaveRoom(userid=-800,siteindex=1)
[2016-06-22 17:02:21(437)] Message OnUserEnterRoom(userid=-800,nickname=1,siteindex=1)
[2016-06-22 17:02:23(400)] On Remote UserCameraControl(dwUserId:-800, bOpen:1)
[2016-06-22 17:02:23(400)] On Remote UserSpeakControl(dwUserId:-800, bOpen:1)
[2016-06-22 17:02:32(285)] On Remote UserCameraControl(dwUserId:-800, bOpen:0)
[2016-06-22 17:02:32(545)] On Remote UserSpeakControl(dwUserId:-800, bOpen:0)
[2016-06-22 17:02:32(545)] On Remote UserCameraControl(dwUserId:-800, bOpen:1)
[2016-06-22 17:02:32(545)] On Remote UserSpeakControl(dwUserId:-800, bOpen:1)
[2016-06-22 17:02:40(060)] Message OnUserLeaveRoom(userid=-800,siteindex=1)
[2016-06-22 17:02:48(509)] Invoke LeaveRoom(roomid=-1) Elapse:0 ms
[2016-06-22 17:02:48(550)] Invoke LogoutServer(userid=-801) Elapse:47 ms

作者: easyAnyChat 时间: 2016-6-22 17:14
[2016-06-22 17:09:59(085)] ---------------------Init Service--------------------------
[2016-06-22 17:09:59(100)] Current File Version[6, 0, 0, 0],Build time:2016-03-19 21:35:57
[2016-06-22 17:09:59(116)] Debug Level:4, Debug Flags:0x0
[2016-06-22 17:09:59(147)] Start TCP Server Failed, Maybe port(8906) in use?
[2016-06-22 17:09:59(163)] Start UDP Server Failed, Maybe port(8907) in use?
[2016-06-22 17:09:59(178)] AnyChat IPC Filter Plus Init, Build Time:Mar 19 2016 21:35:18
[2016-06-22 17:09:59(178)] Load SDK Filter Plus:IPCFilterPlus.dll Success, ver:SDK Filter Plus (IPC), for Windows V6.0

作者: easyAnyChat 时间: 2016-6-22 17:19
我想简单点的解决方法就是调用 BARC_Release 这个方法但是好像sdk里面没有

作者: 佰锐科技-陈伟 时间: 2016-6-22 18:03

easyAnyChat 发表于 2016-6-22 17:19
我想简单点的解决方法就是调用 BARC_Release 这个方法但是好像sdk里面没有

您好 Web SDK 是没有BRAC_Release 接口的；可以使用1. BRAC_LeaveRoom 离开房间；2. BRAC_Logout 用户注销

作者: 佰锐科技-陈伟 时间: 2016-6-22 18:05

easyAnyChat 发表于 2016-6-22 17:14
[2016-06-22 17:09:59(085)] ---------------------Init Service--------------------------
[2016-06-22 ...

您好另外核心服务器日志显示
[2016-06-22 17:09:59(147)] Start TCP Server Failed, Maybe port(8906) in use?
[2016-06-22 17:09:59(163)] Start UDP Server Failed, Maybe port(8907) in use?
检查下TCP和UDP端口，是否启动了两个核心服务器呢？

作者: easyAnyChat 时间: 2016-6-22 18:05
两个用了都不行没法了

作者: easyAnyChat 时间: 2016-6-22 18:27
我再看看吧谢谢

作者: 佰锐科技-邵光清 时间: 2016-6-22 20:44

easyAnyChat 发表于 2016-6-22 18:27
我再看看吧谢谢

您好：
1、在web SDK中没有BARC_Release方法，已经封装在库中，调用logout即可；
2、日志显示： ****Open Local Video Fail,ErrorCode:10011，是否本机没有摄像头呢，或者在本机上开了两个客户端？
3、Start TCP Server Failed, Maybe port(8906) in use?
Start UDP Server Failed, Maybe port(8907) in use?
Anychat核心服务器的日志显示，是否TCP和UDP端口被占用了呢，是否启动了两个Anychat核心服务器呢？
4、是不是IE浏览器呢（IE资源释放确实存在问题，需要刷新页面）？试试使用其他非IE内核浏览器呢？

欢迎光临 AnyChat技术支持论坛 (http://bbs.anychat.cn/)